S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
13-3
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 13 Troubleshooting IVR
Initial Troubleshooting Checklist
Initial Troubleshooting Checklist
Begin troubleshooting IVR issues by checking the following issues:
If you change any FSPF link cost, ensure that the FSPF path cost (that is, the sum of the link costs on
the path) of any IVR path is less than 30,000.
This section includes the following topics:
•
Verifying IVR Configuration Using Fabric Manager, page 13-3
•
Verifying IVR Configuration Using the CLI, page 13-4
•
IVR Enhancements by Cisco SAN-OS Release, page 13-5
Verifying IVR Configuration Using Fabric Manager
To verify your IVR configuration using Fabric Manager, follow these steps:
Table 13-1
IVR Configuration Limits
IVR Feature
Maximum Limit
IVR zone members
•
20,000 IVR zone members per physical fabric
as of Cisco SAN-OS Release 3.0(3).
•
10,000 IVR zone members per physical fabric
prior to Cisco SAN-OS Release 3.0(3).
IVR zones
•
8000 IVR zones per physical fabric as of
Cisco SAN-OS Release 3.0(3).
•
2000 IVR zones per physical fabric prior to
Cisco SAN-OS Release 3.0(3).
IVR zone sets
32 IVR zone sets per physical fabric.
Checklist
Check off
Verify licensing requirements. See
Cisco MDS 9000 Family Fabric Manager
Configuration Guide
.
Verify that IVR is enabled on all border switches involved in IVR.
Verify that you have the correct license installed (SAN_EXTENSION for IVR over FCIP
or ENTERPRISE_PKG for IVR over Fibre Channel).
Verify that the IVR configuration is the same on all IVR-enabled switches.
Verify that the IVR zone is part of the active IVR zone set.
Verify that you have an active zone set or that you activate the IVR zone set using the
force
option.
Verify that you have added IVR virtual domains to the allowed domain ID list if you have
a Cisco SN5428 storage router or a Cisco MDS 9020 switch in your fabric.
