S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
23-6
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 23 Troubleshooting SANTap
SANTap Issues
Example 23-7 Display SANTap Remote Virtual Terminal Information
switch#
show santap module 2 rvt
RVT Information :
rvt pwwn = 2a:61:00:05:30:00:22:25
rvt nwwn = 2a:62:00:05:30:00:22:25
rvt id = 17
rvt vsan = 4
rvt if_index = 0x1080000
Example 23-8 Display SANTap Remote Virtual Terminal LUN Information
switch#
show santap module 2 rvtlun
RVT LUN Information :
rvt pwwn = 2a:61:00:05:30:00:22:25
rvt lun = 0x0
xmap id = 22
rvt id = 17
app pwwn = 22:00:00:20:37:39:b1:00
app lun = 0x0
app vsan = 1
Use the following commands to display more advanced troubleshooting information for SANTap.
•
show tech-support
•
show santap module 2 tech-support
•
show isapi tech-support
•
show santap vttbl dvt
dvt-pwwn
Messages, Logs and Databases
The following log files and databases can provide helpful information when troubleshooting SANTap
problems.
•
Look for SSM_CRIT in Sup syslog messages.
•
SANTap logs are available via the
show isapi tech-support
CLI command. Search for the strings
“Error” and “failed” or “failure.”
•
Review FCNS and FLOGI databases, using the
show fcns
and
show flogi
CLI commands.
SANTap Issues
This section includes the following topics:
•
Host Login Problems, page 23-7
•
ITL Problems, page 23-7
•
Common Mismatch Problems, page 23-7
