IN-1
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
I N D E X
Numerics
11n Mode parameter
1250 series access points
and PoE Status field
operating modes when using PoE
transmit power settings when using PoE
3DES IPSec data encryption
7920 AP CAC parameter
7920 Client CAC parameter
7920 support mode
configuring
described
7921 support mode
802.11a (or 802.11b) > Client Roaming page
802.11a (or 802.11b) > Video Parameters page
802.11a (or 802.11b) > Voice Parameters page
802.11a (or 802.11b/g) > EDCA Parameters page
802.11a (or 802.11b/g) Global Parameters > Auto RF
page
802.11a (or 802.11b/g) Global Parameters page
802.11a (or 802.11b/g) Network Status parameter
802.11a/n (4.9 GHz) > Configure page
802.11a/n (or 802.11b/g/n) Cisco APs > Configure
page
802.11a/n (or 802.11b/g/n) Radios page
802.11a > Pico Cell page
802.11a > Pico Cell page with pico cell mode V2
parameters
802.11a > RRM > Coverage page
802.11a > RRM > DCA page
802.11a > RRM > Dynamic Channel Assignment (DCA)
page
802.11a > RRM > General page
802.11a > RRM > Tx Power Control (TPC) page
802.11b/g/n Cisco APs > Configure page
802.11 bands
configuring using the CLI
configuring using the GUI
802.11g Support parameter
802.11n
clients
configuring
using the CLI
using the GUI
802.11n (2.4 GHz) High Throughput page
802.1Q VLAN trunk port
802.1X
configuring
described
dynamic key settings
802.1X+CCKM
configuring
described
802.1X authentication for access points
configuring
the switch
using the CLI
using the GUI
described
802.1x Authentication parameter
802.3 bridging
configuring using the CLI
configuring using the GUI
802.3 Bridging parameter
802.3 frames