4-28
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 4 Configuring Controller SettingsWireless Device Access
Changing the Default Values for SNMP v3 Users
Figure 4-7
SNMP V3 Users Page
Step 2
If “default” appears in the User Name column, hover your cursor over the blue drop-down arrow for the
desired user and choose
Remove
to delete this SNMP v3 user.
Step 3
Click
New
to add a new SNMP v3 user. The SNMP V3 Users > New page appears (see
Figure 4-8
SNMP V3 Users > New Page
Step 4
In the User Profile Name field, enter a unique name. Do not enter “default.”
Step 5
Choose
Read
Only
or
Read Write
from the Access Mode drop-down box to specify the access level for
this user. The default value is Read Only.
Step 6
From the Authentication Protocol drop-down box, choose the desired authentication method:
None
,
HMAC-MD5
(Hashed Message Authentication Coding-Message Digest 5), or
HMAC-SHA
(Hashed
Message Authentication Coding-Secure Hashing Algorithm). The default value is HMAC-SHA.
Step 7
In the Auth Password and Confirm Auth Password fields, enter the shared secret key to be used for
authentication. You must enter at least 12 characters.
Step 8
From the Privacy Protocol drop-down box, choose the desired encryption method:
None
,
CBC-DES
(Cipher Block Chaining-Digital Encryption Standard), or
CFB-AES-128
(Cipher Feedback
Mode-Advanced Encryption Standard-128). The default value is CFB-AES-128.
Note
In order to configure CBC-DES or CFB-AES-128 encryption, you must have selected either
HMAC-MD5 or HMAC-SHA as the authentication protocol in
.
Step 9
In the Priv Password and Confirm Priv Password fields, enter the shared secret key to be used for
encryption. You must enter at least 12 characters.