5-42
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring Local EAP
Figure 5-24
Local EAP Profiles Page
This page lists any local EAP profiles that have already been configured and specifies their EAP
types. You can create up to 16 local EAP profiles.
Note
If you want to delete an existing profile, hover your cursor over the blue drop-down arrow
for that profile and choose
Remove
.
b.
Click
New
to open the Local EAP Profiles > New page.
c.
In the Profile Name field, enter a name your new profile and then click
Apply
.
Note
You can enter up to 63 alphanumeric characters for the profile name. Make sure not to
include spaces.
d.
When the Local EAP Profiles page reappears, click the name of your new profile. The Local EAP
Profiles > Edit page appears (see
Figure 5-25
Local EAP Profiles > Edit Page
e.
Check the
LEAP
,
EAP-FAST
,
EAP-TLS
, and/or
PEAP
check boxes to specify the EAP type(s) that
can be used for local authentication.
Note
You can specify more than one EAP type per profile. However, if you choose multiple EAP
types that use certificates (such as EAP-FAST with certificates, EAP-TLS,
PEAPv0/MSCHAPv2, and PEAPv1/GTC), all of the EAP types must use the same
certificate (from either Cisco or another vendor).
