4-88
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 4 Configuring Controller SettingsWireless Device Access
Configuring and Viewing Location Settings
6.
To see the status of active Network Mobility Services Protocol (NMSP) connections, enter this
command:
show nmsp status
Information similar to the following appears:
LocServer IP TxEchoResp RxEchoReq TxData RxData
-------------- ----------- --------- ------- -------
171.71.132.158 21642 21642 51278 21253
7.
To see the NMSP counters, enter this command:
show nmsp statistics
{
summary
|
connection all
}
where
–
summary
shows the common NMSP counters, and
–
connection
all
shows the connection-specific NMSP counters.
Information similar to the following appears for the
show nmsp statistics
summary
command:
NMSP Global Counters
Client Measure Send Fail:
0
Send RSSI with no entry:
0
Send too big msg:
0
Failed SSL write:
0
Partial SSL write:
0
SSL write attempts to want write:
Transmit Q full:
0
Max Measure Notify Msg:
0
Max Info Notify Msg:
0
Max Tx Q Size:
2
Max Rx Size:
1
Max Info Notify Q Size:
0
Max Client Info Notify Delay: 0
Max Rogue AP Info Notify Delay: 0
Max Rogue Client Info Notify Delay: 0
Max Client Measure Notify Delay: 0
Max Tag Measure Notify Delay: 0
Max Rogue AP Measure Notify Delay: 0
Max Rogue Client Measure Notify Delay:0
Max Client Stats Notify Delay: 0
Max Tag Stats Notify Delay: 0
RFID Measurement Periodic:
0
RFID Measurement Immediate: 0
Reconnect Before Conn Timeout: 0
Information similar to the following appears for each active connection when you enter the
show
nmsp statistics connection all
command:
NMSP Connection Counters
Connection 1:
Connection status: UP
Freed Connection: 0
Nmsp Subscr Req:
0
NMSP Subscr Resp:
0
Info Req:
1
Info Resp:
1
Measure Req:
2
Measure Resp:
2
Stats Req:
2
Stats Resp:
2
Info Notify:
0
Measure Notify:
0
Loc Capability:
2
Location Req:
0
Location Rsp:
0
