5-27
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring
Information similar to the following appears for the
show tacacs auth stats
command:
Server Index..................................... 1
Server Address................................... 10.10.10.10
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops....................................0
5.
To clear the statistics for one or more servers, enter this command:
clear stats tacacs
[
auth
|
athr
|
acct
] {
index
|
all
}
6.
To configure the order of authentication when multiple databases are configured, enter this
command. The default setting is local and then radius.
config aaa auth mgmt
[
radius
|
tacacs
]
To see the current management authentication server order, enter this command:
show aaa auth
Information similar to the following appears:
Management authentication server order:
1............................................ local
2......................................... tacacs
7.
To make sure the controller can reach the server, enter this command:
ping
server_ip_address
8.
To enable or disable debugging, enter this command:
debug aaa
tacacs
{
enable
|
disable
}
9.
To save your changes, enter this command:
save config
Viewing the Administration Server Logs
Follow these steps to view the administration server logs, if you have a accounting
server configured on the controller.
Step 1
Click
Reports and Activity
on the ACS main page.
Step 2
Click
Administration
.
