![background image](http://html.mh-extra.com/html/cisco/2100-series/2100-series_configuration-manual_19950496.webp)
8-44
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 8 Controlling Mesh Access Points
Viewing Mesh Statistics and Reports
Re-Association Successes 0
Re-Authentication Failures 0
Re-Authentication Timeouts 0
Re-Authentication Successes 0
•
To view the number of packets in the queue by type, enter this command:
show mesh queue-stats
Cisco_AP
Information similar to the following appears:
Queue Type Overflows Peak length Average length
---------- --------- ----------- --------------
Silver 0 1 0.000
Gold 0 4 0.004
Platinum 0 4 0.001
Bronze 0 0 0.000
Management 0
0 0.000
Overflows
—
The total number of packets dropped because of queue overflow.
Peak Length
—
The peak number of packets waiting in the queue during the defined statistics time
interval.
Average Length
—
The average number of packets waiting in the queue during the defined statistics
time interval.
Viewing Neighbor Statistics for an Access Point
This section explains how to use the controller GUI or CLI to view neighbor statistics for a selected
access point. It also describes how to run a link test between the selected access point and its parent.
Using the GUI to View Neighbor Statistics for an Access Point
Using the controller GUI, follow these steps to view neighbor statistics for an access point.
Step 1
Click
Wireless
>
Access Points
>
All APs
to open the All APs page (see
).
Figure 8-20 All APs Page
Step 2
To view neighbor statistics for a specific access point, hover your cursor over the blue drop-down arrow
for the desired access point and choose
Neighbor Information
. The All APs >
Access Point Name
>
Neighbor Info page for the access point appears (see
).