Contents
v
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Using the CLI to Configure the Management, AP-Manager, Virtual, and Service-Port Interfaces
3-13
Using the CLI to Configure the Management Interface
3-13
Using the CLI to Configure the AP-Manager Interface
3-14
Using the CLI to Configure the Virtual Interface
3-14
Using the CLI to Configure the Service-Port Interface
3-15
Configuring Dynamic Interfaces
3-16
Using the GUI to Configure Dynamic Interfaces
3-16
Using the CLI to Configure Dynamic Interfaces
3-18
3-19
3-22
Configuring Spanning Tree Protocol
3-23
Using the GUI to Configure Spanning Tree Protocol
3-24
Using the CLI to Configure Spanning Tree Protocol
3-28
3-29
3-32
Using the GUI to Enable Link Aggregation
3-33
Using the CLI to Enable Link Aggregation
3-34
Using the CLI to Verify Link Aggregation Settings
3-34
Configuring Neighbor Devices to Support LAG
3-34
Configuring a 4400 Series Controller to Support More Than 48 Access Points
3-34
3-35
Using Multiple AP-Manager Interfaces
3-35
Configuring Controller SettingsWireless Device Access
4-1
Using the Configuration Wizard
4-2
4-2
Resetting the Device to Default Settings
4-3
Resetting to Default Settings Using the CLI
4-3
Resetting to Default Settings Using the GUI
4-3
Running the Configuration Wizard on the CLI
4-4
Using the AutoInstall Feature for Controllers Without a Configuration
4-6
4-6
Obtaining an IP Address Through DHCP and Downloading a Configuration File from a TFTP
Server
4-7
Selecting a Configuration File
4-8
Example of AutoInstall Operation
4-9
Managing the System Date and Time
4-10
Configuring an NTP Server to Obtain the Date and Time
4-10
Configuring the Date and Time Manually
4-10