Contents
xiii
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Configuring Authentication for Access Points
7-9
Using the GUI to Configure Authentication for Access Points
7-10
Using the CLI to Configure Authentication for Access Points
7-12
Configuring the Switch for Authentication
7-14
7-14
Autonomous Access Points Converted to Lightweight Mode
7-16
Guidelines for Using Access Points Converted to Lightweight Mode
7-16
Reverting from Lightweight Mode to Autonomous Mode
7-17
Using a Controller to Return to a Previous Release
7-17
Using the MODE Button and a TFTP Server to Return to a Previous Release
7-17
7-18
Authorizing Access Points Using SSCs
7-18
Authorizing Access Points Using MICs
7-18
Authorizing Access Points Using LSCs
7-19
Using the GUI to Authorize Access Points
7-22
Using the CLI to Authorize Access Points
7-23
Using DHCP Option 43 and DHCP Option 60
7-24
Troubleshooting the Access Point Join Process
7-24
Configuring the Syslog Server for Access Points
7-26
Viewing Access Point Join Information
7-26
Using a Controller to Send Debug Commands to Access Points Converted to Lightweight Mode
7-28
Converted Access Points Send Crash Information to Controller
7-28
Converted Access Points Send Radio Core Dumps to Controller
7-28
Using the CLI to Retrieve Radio Core Dumps
7-29
Using the GUI to Upload Radio Core Dumps
7-29
Using the CLI to Upload Radio Core Dumps
7-30
Uploading Memory Core Dumps from Converted Access Points
7-31
Using the GUI to Upload Access Point Core Dumps
7-31
Using the CLI to Upload Access Point Core Dumps
7-32
Display of MAC Addresses for Converted Access Points
7-32
Disabling the Reset Button on Access Points Converted to Lightweight Mode
7-33
Configuring a Static IP Address on an Access Point Converted to Lightweight Mode
7-33
Supporting Oversized Access Point Images
7-33
7-34
7-35
7-37
Using the GUI to View the Status of Workgroup Bridges
7-37
Using the CLI to View the Status of Workgroup Bridges
7-40
Using the CLI to Debug WGB Issues
7-40