6-4
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 6 Configuring WLANsWireless Device Access
Configuring WLANs
Figure 6-1
WLANs Page
This page lists all of the WLANs currently configured on the controller. For each WLAN, you can see
its WLAN ID, profile name, type, SSID, status, and security policies.
The total number of WLANs appears in the upper right-hand corner of the page. If the list of WLANs
spans multiple pages, you can access these pages by clicking the page number links.
Note
If you want to delete a WLAN, hover your cursor over the blue drop-down arrow for that WLAN
and choose
Remove
, or check the check box to the left of the WLAN, choose
Remove Selected
from the drop-down box, and click
Go
. A message appears asking you to confirm your decision.
If you proceed, the WLAN is removed from any access point group to which it is assigned and
from the access point’s radio.
Step 2
To create a new WLAN, choose
Create
New
from the drop-down box and click
Go
. The WLANs > New
page appears (see
).
Figure 6-2
WLANs > New Page
Step 3
From the Type drop-down box, choose
WLAN
to create a WLAN.
Note
If you want to create a guest LAN for wired guest users, choose
Guest LAN
and follow the
instructions in the