Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 84 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 84
Defining the analyzer / PC interface
Note
The operating software can only be operated in combination with the analyzer if the serial number of
the instrument matches the software licence number. This ensures that the analyzer is always
operated together with the same software and the settings recorded in the logbook.
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Defining the analyzer / PC interface
Proceed as follows:

Open the "Device configuration" dialog by selecting
Options > Configuration
.

Select the "DEVICE.INI" tab. Then select the "Analyzer Port" section by clicking the arrow next to
the "Section" dropdown listbox.

Select in the "Items" listbox the entry "Name" and click
Edit
. The "Configure key value" dialog is
displayed:

Enter the name of the serial port (e.g. "COM2") in the "Value" field and click
OK
. The "Comment
modification" dialog is displayed.

Enter a justification in the "Comment modification" dialog and click
Close
.

Click
OK
in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.

Click
OK
and quit the operating software.

Restart the operating software as required.
Dialog details
Details on the "Device configuration" dialog can be found in
Device configuration
(on page 325).
Defining the LIMS / PC interface
Defining the LIMS / PC interface
Proceed as follows:

Open the "LIMS settings" dialog by selecting
Options> Settings> LIMS
.

Select the "Communication" tab. Define your settings.

Click
OK
in the "LIMS settings" dialog. Your settings are saved and the dialog is closed.
Dialog details
Details on the "LIMS settings" dialog can be found in
LIMS settings
(on page 319).