Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 330 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 330
Remaining elements:
Label Element type Meaning
OK
Button Saves new settings
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Shutting the instrument down for short measuring breaks (standby).

Optimizing sleep and wake-up behavior
(on page 132).

Optimizing basic instrument settings
(on page 97).
Configure key value (Dialog)
Function
This dialog is used to configure the system. In this dialog you allocated values to the system that
influence the system's behavior.
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Open
Open the "Configure instrument" dialog by selecting
View > Configuration
. Click:

Edit
to edit a selected entry in a section.

Insert
to create a new entry in a section.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Key Textbox/label Field to input the key. This field displays the key of an entry
previously selected in the "Device configuration" dialog and
allows you to edit this key. The field is only enabled if the
dialog was opened via the
Insert
button.
Value Textbox/label Field to input the value. This field displays the value of an
entry previously selected in the "Device configuration"
dialog and allows you to edit this key.
OK
Button Saves new settings
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Granting authorizations
(on page 81).

Defining logon timeout
(on page 76).