Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 325 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 325
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Year Textbox with
buttons
Field to input a year. You can also set the year in the
textbox using the arrows.
Month Textbox with
buttons
Field to input a month. You can also set the month in the
textbox using the arrows.
OK
Button Saves new settings
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Viewing the logbook
(on page 90).

21 CFR Part 11 functionality
(on page 71).
Device configuration (Dialog)
Function
In this dialog you can define initialization entries to adjust system behavior.
The individual tabs represent the respective initialization files. There are various sections in an
initialization file. Each section contains entries whose values influence the behavior of the system.
During operation, the system stores certain information in the initialization files. It is usually not
necessary to modify these values. The entries that may be changed are located on the following tabs:

DEVICE.INI

LEAKTEST.INI
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Note
This section only describes the sections of the tabs in which you can make changes via the "Device
configuration" dialog only, as these sections do not have their own settings menu.
If 21 CFR Part 11 functionality is enabled, every change to the configuration must be justified in the
"Comment modification" dialog.
Open
Open the dialog by selecting
Options > Configuration
.
Elements
The following describes the elements of the dialog.