Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 294 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 294

Routine measuring work
(on page 55)

Types of blank value determination and their settings

Formulae for blank value determination and compensation
(on page 56)
Math. > Factor (Command)
What is the command used for?
This command computes the daily factor of a series of analyses.
Define type of peak (Dialog)
Function
In this dialog the behavior of the manual peak integration will be defined.
Open
Open the dialog by selecting
Math. > Manual Peak Integration > Type
. The dialog can only be
opened when the graphic view is activated and display is set to a single detector signal.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
single peak Radiobutton Sets the behavior in such a way that single peaks can be
edited in the manual integration process. An integration
process is executed by setting a start and end tag each.
Superimposed peak Radiobutton Sets the behavior in such a way that superimposed peaks
can be edited in the manual integration process. An
integration process is executed by setting a start and end
tag each for the socket and the "superimposed" peak.
straight baseline Checkbox If activated, a baseline is used which runs parallel to the x-
axis (time axis).
If deactivated, a baseline is used which start height is at
the start tag and which end height is at the end tag.
OK
Button Saves the new settings.
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Manual peak integration
(on page 150).
Define peak start / end (Dialog)
Function
The dialog serves for the definition of the peak start and end tags and the height of the baseline
during the manual peak integration.