Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 316 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 316
Label Element type Meaning
autom. Auto-
decrement the
number in the sample
name
Radiobutton Works the same way as auto-increment, only the figure in
the name is decremented.
Exception:

The figure "zero" is not decremented.
Increment/decrement
interval
Textbox with
Buttons In this field you can input the interval at which to
increment/decrement the figure in the name. This figure
can be between 1 and 99. The number must, however, fit
in the displayable number of digits, otherwise the number is
not changed.
Fill method names to
stop marker
Checkbox If, for example, you have input/copied 10 successive
sample names with the sample memory empty, the stop
marker is now at the tenth sample. If you have input a
method name for the first sample, this name is entered for
all ten samples.
Fill daily factors to
last sample
Checkbox The daily factor input for the first sample is entered for all
subsequent samples.
Fill blank values to
last sample
Checkbox The blank value input for the first sample is entered for all
subsequent samples.
OK
Button Saves new settings
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Settings for sample input
(on page 131).

Optimizing sample data editing
(on page 97).
Standard samples (Dialog)
Function
In this dialog you can create, delete, view, copy and change standard samples.
Open
Open the dialog by selecting
Options > Settings > Standards
.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
--- Listbox This field lists all standard samples already defined.
Name Textbox/label Field to input the name of the standard sample.
{Element} conc. [%]
(or {Element} conc.
[ppm])
Textbox/label Field to input the theoretical percentage content of the
corresponding element in the respective sample.
{Element} tolerance
[%]
Textbox/label Field to input the tolerance limit of the corresponding
element. The tolerance limit is required if standard
tolerance monitoring is enabled.