Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 195 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
8 - Maintaining the instrument 195
When to replace sealing elements
What sealing elements are used?
The following sealing elements are used:

Half shells

O-rings

Quad rings

Ferrules
When to replace sealing elements
The following table gives an overview of what instrument components contain which sealing elements
and when to replace these sealing elements:
Instrument component What to replace To be replaced when...
Ball valve Half shells ... the ball valve is serviced and the half shells
exhibit grooves.
O-rings ... the ball valve is serviced and

the o-rings exhibit cracks or other damage
or

the o-rings no longer protrude round out of
the grooves.
Quartz glass bridge O-rings ... you cannot feel any elastic resistance when
you press in the o-rings when installing the
quartz glass bridge.
Plug of Reductor ® O-rings

... you can hardly feel any contact pressure
when inserting the Reductor plug.

... the o-rings no longer protrude round out
of the grooves of the plug.
Quad ring ... you cannot feel any elastic resistance when
pressing on the ball.
Drying tube (small, left) O-rings ... the o-rings no longer protrude round out of
the grooves of the plug.
Combustion tube connection
with Ni flap
O-rings

... you can hardly feel any contact pressure
when inserting the combustion tube
connector into the combustion tube.

... the o-rings no longer protrude round out
of the grooves of the combustion tube
connector.
Post combustion tube O-ring 
... you can hardly feel any contact pressure
when inserting the post combustion tube
plug.

... the o-rings no longer protrude round out
of the grooves of the plug.
Quad ring ... you cannot feel any elastic resistance when
pressing on the ball.
Drying tube (large, right) O-rings ... the o-rings no longer protrude round out of
the grooves of the plug.