Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 326 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 326
Valid for all tabs:
Label Element type Meaning
Section Dropdown listbox This field lists the available sections. Field to input a name for
a new section.
Entries Listbox This field lists the entries of a previously selected section.
New Section
Button Creates a new section under the name previously entered in
the dropdown listbox.
Edit
Button Opens the "Configure key value" dialog. Allows you to edit a
section entry previously selected from the list.
Delete
Button Deletes a section previously selected in the dropdown listbox.
Deletes a section entry previously selected in the listbox.
Paste
Button Opens the "Configure key value" dialog. Allows you to insert
new entries in a section.
Import
Button Opens the "Open" dialog. Allows you to import further
sections.
Export
Button Opens the "File save as" dialog. Allows you to export
sections.
Delete all
Button Deletes all entries which are included in the activated tab.
OK
Button Saves new settings
"DEVICE.INI" tab
The following table describes the entries under the "AnalyzerPort" section:
Entry Standard Description
Name COM1 Defines the serial interface between the PC and the analyzer.
Baud 9600 Defines the transfer rate of the serial interface between the PC
and the analyzer.
Data 8 Defines the number of databits of the serial interface between the
PC and the analyzer.
Stop 1 Defines the number of stopbits of the serial interface between the
PC and the analyzer.
Parity N Defines the type of parity check of the serial interface between the
PC and the analyzer.

N= no parity check

E= even parity check

O= odd parity check.
The following table describes the entries under the "BalancePort" section:
Entry Standard Description
Name ---- Defines the serial interface between the PC and the balance.
Baud 300 Defines the transfer rate of the serial interface between the PC
and the balance.
Data 7 Defines the number of databits of the serial interface between the
PC and the balance.
Stop 1 Defines the number of stopbits of the serial interface between the
PC and the balance.