Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 61 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
4 - Understanding the instrument and planning its use 61

... "wake up" the "sleeping" instrument.

... start and stop individual and continuous analyses.

... display the online help.
Details on the various buttons on the toolbar can be found at
Toolbar
(on page 333) and in the online
help.
Sample view
The sample view displays a table of input, measuring and computed analysis data of all samples in a
particular series. If an error occurs while measuring a sample, the table contains an appropriate
message. For details on the sample view, see The sample view.
Combi view
The combi view contains different information depending on the selected display mode:

In progression/graph view, it displays the time-dependent development of the detector signals or
a diagram of various instrument parameters of the currently selected sample.

In statistics view it displays statistical analysis data of the selected group of samples.

In calibration window view it displays a diagram of the calibration factors for the series under
review and the calibration curves of the individual elements.
For details on the combi view and its various display modes, see The combi view.
"Current sample" field
This field displays a zoomed-in view of the data of the current sample. Here you can view the analysis
results of the particular sample at a glance, even if you are not directly in front of the screen.
Status view
The status view contains information about the current operating states of the elemental analyzer. For
details on the status view, See The status view.
Status bar
The status bar can contain the following information:

If you hover the mouse over a menu command or toolbar button, a short help text on the
command is displayed on the left of the status bar.

The name of the current user logged in is displayed in the middle of the status bar.

The name of the user group to which the currently logged in user belongs is displayed on the
right.
Sample view
Introduction
The following section describes what you can input in the sample view and what information you can
get from the sample view.