Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 156 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
7 - Using the instrument 156
Data backup and printing
Why backup and print data?
The measuring data of a sample are displayed on screen and saved to a temporary file after every
analysis. In order to save the data permanently, it is necessary to save them separately or print them
out.
Graph view
All graphical information (pressure, peaks, etc.) of a sample are saved. This allows you to view and
print various measuring variables in a graph. If any error messages or fluctuating measuring values
occur, it is useful to consult the graph.
Viewing and printing the graph
Proceed as follows:

In the sample view (text view), select the sample line whose graph you wish to display.

If the graphic view of the combi view is not already being displayed, execute the command
View
> Toggle
until the graphic view appears or click
Graphic field
in the menu bar above the combi
view.

Specify what measuring variables you want to display in the graph. Open the "Configure Graphic
Pane" dialog by selecting
View > Graphic > Configure
.

Define your settings:

Check the measuring variables to display. You can select up to 4 measuring variables.

In the "Zero line" section you can move the zero line up.

In the "X-axis configuration" section you can influence the graph display area.

Click
OK
. The graph is displayed with your settings.

Execute the command
File > Print
to print out the graphic. The "Configure report" dialog is
displayed.

Define the print settings as required:

Enter a title in the "Title" section. It can consist of up to three lines.

Check the appropriate options in the "Report options" section.

Click
OK
. The "Print" dialog is displayed in which you can start printing.
Permanently backing up measuring data and graphical information
Proceed as follows:

Execute the following command:
File > Save
.
If the document...

... has already a name: The document is automatically updated. The storing process has
been completed.

... has not yet a name: The "Save document" dialog appears.

Enter the desired document name in the header of the "Save document" dialog.

Click
OK
. The measuring data are saved.