Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 85 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 85
Defining the balance / PC interface
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Defining the balance / PC interface
Proceed as follows:

Open the "Device configuration" dialog by selecting
Options > Configuration
.

Select the "DEVICE.INI" tab. Then select the "Balance Port" section by clicking the arrow next to
the "Section" dropdown listbox.

In the listbox "Items" select the entry that you want to change and click
Edit
. The "Configure key
value" dialog is displayed:

Enter the desired value in the "Value" field and click
OK
. The "Comment modification" dialog is
displayed.

Enter a justification in the "Comment modification" dialog and click
Close
.

If necessary, repeat the steps mentioned above to modify further settings.

Click
OK
in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.

Click
OK
and quit the operating software.

Restart the operating software as required.
Dialog details
Details on the "Device configuration" dialog can be found in
Device configuration
(on page 325).