Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 279 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 279
View > Toggle (Command)
What is the command used for?
This command changes the field in the combi view.
Note
Execute this command several times to switch to the desired view. The sequence is: Calibration view
- progression graph - statistics view - calibration view, etc.
Also by clicking on the caption bar of the combi view you can change to the reqested view.
Zoom in/out (Dialog)
Function
In this dialog you can zoom in/out details of the graphical progression of an analysis or the calibration
graph.
Open
Open the dialog via:
Menu command Button Hot key
View > Zoom in/out
---
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Zoom factor Dropdown listbox Field to select the zoom factor. You can choose between
zoom factors of 1; 2, 5; 10; 20; 50 and 100. At factor > 1
the graph view is enclosed by scrollbars so that you can
select a specific area.
OK
Button Zoom in/out of the graph.
Cancel
Button Aborts the process.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Setting the size of the graph
(on page 154)
Configure sample view (Dialog)
Function
This dialog is used to configure the sample view. It is possible to show/hide every column and to
change the display sequence.
Open
Open the dialog via
View > Gridview > Configure.
The sample view must be active in order to open
the dialog.