Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 307 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 307
Maintenance intervals (Dialog)
Function
In this dialog, any number of maintenance events can be defined and viewed.
Open
Open the dialog via
Options > Maintenance > Intervals
.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
--- Listbox In this field the texts of all currently defined events are
displayed. Each text has a highlighted bar which displays
the urgency of the maintenance:

Green bar: There is still time for maintenance.

Yellow bar: The maintenance must be performed
soon.

Red bar: The maintenance is overdue.
Total: Label Displays the number of all analyses performed so far.
Event: {n} Textbox/label 
Field to enter the text of a new event.
or

The field displays the text of the event selected in the
adjacent list box.
Interval Textbox/label 
Field to input the number of analyzed samples after
which the maintenance must be performed.
or

The field displays the interval of the event selected in
the adjacent list box.
Status Textbox/label 
Field to input the number of samples already analyzed,
e.g. when you install a used tube. You must enter 0 as
the status after performing maintenance.
or

This field displays the number of samples already
analyzed for the adjacent event.
Mode assignment List box with
checkboxes
Allows assignment of the corresponding event to the
different analysis modes. Incrementing of the
corresponding counter will be suppressed if analysis
modes are not checked here.
Information only Radiobutton When a maintenance event falls due, the system only
displays a message in the status view. See Defining
maintenance intervals in the software.
Information and stop
continuous analysis
Radiobutton When a maintenance event falls due, the system displays a
message in the status view and continuous analysis is
stopped.
New
Button Allows the definition of a new event.
Delete
Button Removes the selected event from the list.
Save
Button Saves the settings made.
Close
Button Closes the dialog.