Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 262 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 262
Open
Open the dialog via:
Menu command Button Hot key
File > Print
CTRL + P
File > Report configuration
--- ---
File > Print preview
CTRL + S
File > Report configuration
--- ---
Elements
The following describes the elements of the dialog.
In section "Title":
Label Element type Meaning
Line 1 Textbox Field to input a header.
Line 2 Textbox Field to input a header.
Line 3 Textbox Field to input a header.
In section "Report options":
Label Element type Meaning
Print parameters Checkbox The analysis log is preceded by a list of the currently valid
parameters.
Print coefficients Checkbox The analysis log is preceded by a list of the currently valid
calibration coefficients.
Print tagged
samples only
Checkbox Only samples that are highlighted in the text field will be
printed.
Print colors Checkbox The printout is in color.
If you are using a black/white printer and the gray values
corresponding to the colors are unsatisfactory, do not
check this box.
Print selected
columns only
Checkbox By activating this option, only columns are printed which
were selected in the dialog "Select print columns".
--- Dropdown listbox This allows the selection which screen shall be printed:
text, graphics, statistics, calibration. This option is not
accessible if the dialog was invoked via
File > Report
configuration
.
Remaining elements:
Label Element type Meaning
OK
Button Saves new settings
Cancel
Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:

Data backup and printing
(on page 156).

Configure report
(on page 155).

Display print preview
(on page 155).