Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 63 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
4 - Understanding the instrument and planning its use 63
Meaning of symbols in the "No." column
In the "No." column a symbol is displayed next to the serial number generated by the system; this
symbol indicates the status of the individual samples. The following table lists the possible symbols
and what they mean.
Icon Meaning
Sample not yet analyzed, but a measuring method has been set and a sample name
exists.
Sample not yet analyzed, but a sample name has been set and a method does not yet
exist.
Sample analyzed error-free with valid date information.
Sample without valid date information.
Sample which caused a non-critical error during measurement or when the measured
peak area is outside of the specified calibration. The result was interpolated. The error
code is entered in the "Info" column, see
Interpreting PC error messages
(on page
238).
Sample at which the series was stopped.
Further information in the sample view
Depending on the selected operating mode, the following values can be displayed in the appropriate
columns for each analyzed sample:

the integrals of the samples

the element content percentages of the samples

the daily factors of the elements for the particular sample

the blank values of the elements for the particular sample

date and time of measuring the particular sample
By selecting the
View > Configuration
menu you can show/hide every table column and define the
order as desired.
Note on data output
The selected sample view screen view also corresponds to the display in a printed report.
Combi view
Introduction
The following section describes the various views of the combi view and their information contents. By
selecting the
View > Toggle
menu you can switch between the following combi views:

Progression view (graph view)

Statistics view

Calibration view