Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 622 / 641

622 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
7.7.4 Configuring the optional additional module barcode scanner
The Configuring the tightening channel does not differ between ErgoSpin hand-held nutrunners with or
without optional additional module "barcode scanner". The only distinctive feature is that hand-held
nutrunners with barcode scanners have a PE number.
The barcode scanner within the hand-held nutrunner can be selected as ID code source (see „Selection
of the source for ID-codes“ on page 200 ) and can be configured manually. The barcode scanner settings
can be modified using the following:
• CS/KE: System

Tightening cell data

Scanner

Scanner in the hand-held nutrunner
• SE352M: System

SE data

Scanner

Scanner in the hand-held nutrunner
The following setting options are available:
• Activate or deactivate barcode scanner
• Valid (permitted) barcode types, the length of the same, and whether the corresponding barcode
type is active
There are several options for the length of the corresponding barcode:
– Entry of a fixed length , e.g. „ 12 “
– Entry of 2 fixed lengths , e.g. „ 4;8 “
– Entry of a length range , e.g. „ 3–9 “
– No length restriction, i.e. " all " or ""
• Barcode-specific options, such as the "Security Level"
• Time-dependent parameters, i.e.
– Activation time
– Release time
– Signal time
– Delay during continuous operation
Table 7–40 shows the as-delivered-state of this time-dependent parameters.
After configuration of the barcode scanner within the ErgoSpin hand-held nutrunner, there are the
following options:
• Updating the configuration data
• Sending the configuration data to the hand-held nutrunner
The optional barcode scanner for the versions SlimLine, GripLine, and VarioLine of the ErgoSpin hand-
held nutrunner is available as of V2.200 of the
Rexroth Tightening System 350 .