Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 405 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 405 /641
System 350 | 3 608 878 300/2019-03
MID 0082 Set the time in the tightening controller
6.7.7.12 Application result (ASCII format)
MID 0100
Application results data subscription
1)
MID 0101
Upload application results data response
1))
MID 0101 revision 001
Sent by:
superordinate computer
Set the time in the tightening controller
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field:
Date and time YYYY-MM-DD:HH:MM:SS, 19 bytes
Possible response MID Error no. Comment
Command accepted 0005 –
1) This message is supported from version V2.300 of the Rexroth Tightening System 350 .
Sent by:
superordinate computer
Application results data subscription
Note:
-
Revision:
001 Rexroth OP-Ford
Data field:
is empty, 0 bytes
Possible responses MID Error no. Comment
Command accepted 0005 –
Command error 0004 33 Activation for multiple spindle results already
available
Sent by:
Tightening controller
Upload application results data response
In the results protocol, data such as program number, limits for torque and angle are determined from the last
tightening step of the first tightening position of the application. Other requirements are as follows:
– The same tightening program number must be used at all tightening positions.
– Parameterization in this tightening program is the same for all tightening positions.
Note:
-
Revision:
001 (supported by Rexroth OP-Ford)
Data field:
Data 154 + 18 x number of spindles bytes
Possible response MID Error no. Comment
Acknowledge multiple spindle results
data 0102 –
Table 6–110: MID 0101 revision 001
Parameter Comments Bytes
Number of spindles Number of spindles in the application.
The value consists of two ASCII characters.
ID 01
2
Value range 01 – 40
Presetting
Example:
Number of
spindles 04
Value 04
2