Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 213 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 213 /641
System 350 | 3 608 878 300/2019-03
Output formats in binary format
If values cannot be displayed in the "PLC 3964R" data outputs (see „3964R communication“ on
page 259 ) in the "binary numbers" or "data field bus" number format, they are displayed with an invalid
value –2147483648 (0x80000000). This is for example the case if one or several tightening steps in
which the values are to be determined have not been run through or if the channel is in "bypass" (see
"Project planning" documentation of the Rexroth Tightening System 350).
The value –21474836480 is used as the initialization value in the system.
Angle A < 10 degrees 1 2
A < 100 degrees 2 2
A < 1000 degrees 3 2
A < 10000 degrees 4 2
A < 100000 degrees 5 2
Time t < 10 s 1 2
t < 100 s 2 2
t < 1000 s 3 2
t < 10000 s 4 2
Table 6–10: Number of digits before and after the decimal point for measurement values
Measurement/limit value Number
Integer parts Number
Decimal points
Example ESA065G hand-held nutrunner with maximum allowable output torque of 65 Nm. The set and actual
torque values are indicated with two digits before and after the decimal point, e.g. _4.00 or 16.23 or
also _0.17.