Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 495 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 495 /641
System 350 | 3 608 878 300/2019-03
In the following block, the system error codes of the KE as well as (in series) the system error codes of
the channels are transmitted (see table
6–178 ).
Transmission of system error codes is realized in series by means of the handshake signals. In addition,
the error status of PLUS coupling is returned in Plus_ErrCode (if an error occurs).
The following error codes are possible:
• 0: No error
• 1: Invalid type number
• 2: Error during type number decoding
• 3: PQD transmission error (no communication)
• 4: PQD transmission error (PLUS response)
• 5: PLUS communication interrupted, PLUS data service not active or PLUS not (yet) initialized
FO_CyCmp Bool %n+1.1 Cycle Complete
FO_OK Bool %n+1.2 Result OK
FO_NOK Bool %n+1.3 Result not OK
FO_Rdy Bool %n+1.4 Ready for operation
FO_OkByPs Bool %n+1.5 Bypass Result OK
FO_NokByPs Bool %n+1.6 Bypass Result NOK
FO_R_I16 Bool %n+1.7 Reserve
Table 6–178: System error: Addresses 56-63:
Signal Data type Address Signal name/description
KE_ErrCode Word %56 Error code of KE system error
Ch_ErrCode Word %68 Channel system error code
Plus_ErrCode Byte %60 Error code for AckReportStart
KE_ErrClass Byte %61 Error class of KE system error
Ch_ChnNum Byte %62 Applicable channel number for the following two fields
Ch_ErrClass Byte %63 Channel system error class
Table 6–177: Application signals for FO1-8 (2 bytes per application block)
Signal Data type Address Signal name/description