Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 228 / 641

228 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Max. Maximum torque of the step
MEo Tightening from above X X
MEo+ Upper limit for tightening from above X X
MEu Tightening from below X X
TCl– Lower limit for tightening from below X X
MGS Torque threshold for gradient measurement X X
Mittel. Average torque of the step, shows that the torque
values come from the average value monitoring
function
MM Average torque value of the step X X
MM+ Upper limit for average torque value X X
MM– Lower limit for average torque value X X
MP Target function Upper torque X
MPu Target function Lower torque X
MP& Target function Upper relative torque X
MP&u Target function Lower relative torque X
MR Differential redundancy torque as floating decimal
number [Nm] X X X
MR+ Upper limit for differential redundancy torque X X
MRS Torque threshold redundancy monitoring X X
MSTS Torque threshold stick slip X X
MWGS Torque threshold total angle monitoring X X
MWS Threshold torque angle X X
MWSP Programmed torque threshold angle X
M[ Torque range X X
M[+ Upper limit for torque range X X
M[– Lower limit for torque range X X
M_ Torque result as floating decimal number [Nm] X
M– Lower torque limit [Nm] (floating decimal) X X
N Programmed speed X
P_ Program number (0, 1, …, 48) X X X
Pri Serial number of the primary measurement
transducer X
QC_ Quality code X X X
QR_ Redundancy transducer ID ("0" = LT, "1" = Tran1,
"2"=Tran2, "–1" = none) X X X
RC Rework code X X
Red Serial number of the redundant measurement
transducer X
S Step number of the results step in line [YY]/column
[b] format X X X
SB Stopped by; index for switch-off criterion (1 … 35) X X X
SGA Yield point X X
SGA+ Upper limit for yield point X X
SGAP Target function Yield point X
SK Tightening step category (SK) X
Spindle ID number of tightening spindle X
SST_ Tightening position X X
STS Stick slip X X
STS+ Upper limit for stick slip X X
T_ Tightening time X X
Protocol
element Meaning
Standard
Standard
Plus 310 Standard 350