Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 230 / 641

230 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Display of the tightening channel numbers
In the Tightening System 350, channel numbers are always indicated with a card rack field number or
system box number and a slot number. For the CS351 compact system, the channel number is always
"0.1". In order to allow to process the results data using analysis programs created for SYSTEM 200, a
"SYSTEM 200 compatible" channel number is also output in the standard output. The assignment is as
follows:
SYSTEM 200 channel number = (card rack field no.

6)+ slot no.
Description of switch-off criteria (SB)
The switch-off criterion describes the reason why a tightening was stopped. This information is an
important aid for analyzing tightening processes.
Output is in the SB (stopped by) index
Table 6–13: Display of the tightening channel numbers
Channel number CH SYSTEM 200 channel number
0.1 1
0.2 2
.... ....
0.6 6
1.1 7
.... ....
15.5 95
15.6 96
Example SB 3 means that the tightening process was stopped by the target function Torque.
Table 6–14: List of switch-off criteria
Index Process stopped by tightening controller
0
1 Unknown abort
2 Target function General
3 Target function Torque
4 Target function Angle
5 Target function Time
6 Target function Yield point
7 Target function Input
8 MFs
1
Angle too high
9 MFs
1
Torque too high
10 MFs
1
Torque too low
11 MFs
1
Gradient too high
12 MFs
1
Gradient too low
13 MFs
1
Time too high
14 MFs
1
Gradient drop
15 Remove Cw/CCw start signal
16 Currently not assigned
17 Remove En enable signal
18 System error
19 Sync step
20 Rework step
21 NOK – branch step
22 Target function Gradient
23 Target function Upper torque
24 Target function Upper relative torque
25 Target function Lower torque