Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 526 / 641

526 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
7.2 Assembling the tightening cell
7.2.1 Assembling the tightening spindle
7.2.2 Assembling the ErgoSpin hand-held nutrunner
7.2.3 Assembling the CS351 compact system
7.2.4 Assembling the modular system
The system box SB356 or the card rack field BT356 are required in the modular system to support the
control and power electronics.
Defining a tightening program (see page 577)
Sending/saving data (see page 542)
Sending the KE PLC assignment table (see page 609)
Setting the KE time (see page 610)
Sequence test (see page 610)
1 Only for multi-channel operation with more than one card rack field or system box
Fig. 7–2: Overview of commissioning steps for the modular system
Detailed information on the assembly of the tightening spindle can be found in the installation instructions
"
Rexroth Tightening Spindle
"
.
The specific tightening torques set out in the respective operating instructions must be observed when
bolting the components together.
Detailed information on assembling and commissioning the ErgoSpin hand-held nutrunner can be found
in the
"
ErgoSpin
" operating instructions
.
Detailed information on assembling and commissioning the CS351 compact system can be found in the
" CS351 " operating instructions .
The Compact System CS351 is not designed to be directly connected to the public low-voltage power
supply, but is only intended for use in industrial environments (emission classA).
Detailed information on assembling and commissioning the SB356 system box can be found in the
"
SB356
" operating instructions
.
Detailed information on assembling and commissioning the BT356 card rack field can be found in the
" BT356 " operating instructions .