Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 597 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 597 /641
System 350 | 3 608 878 300/2019-03
IMenip This parameter dialog consists of two index cards that can be selected in the Setup EtherNet/IP
interface group:
• I/O and data
• Configuration
Index card: I/O and data
No settings can be made in the Configured ranges field: The grayed out fields cannot be edited. The
parameters displayed in this field depend on the selected number of I/O points.
Index card: Configuration
The following settings can be made in this window:
• Get configuration via DHCP
or
• Use the following configuration: If you select this item, you can enter the following parameters:
– IP address : Assigned by the network administrator; identifies the participant in the data exchange
– Subnet mask : Assigned by the network administrator; contains information on the network
configuration (address range)
– Gateway : Establishes the external connection
• Host name: Name by which the Ethernet participant (here the KE of the tightening system) can be
addressed.
Create ESD file button
A participant profile in form of an EDS (electronic data sheet) file is required to commission the IMenip
interface module. The EDS file (
*. eds ) enables recognition of variable parameters and their value ranges
in the software.

After setting all parameters, create the EDS file by clicking Create EDS file .

Click Accept to transfer the data to the configuration for the tightening channel in the BS350.
Table 7–30: Settings in BS350 for IMenip - I/O and data
Element Description
Number of I points Number of control signals to be processed via the EtherNet/IP interface. Value
range 16 to 512 input signals (2 to 64 bytes)
Number of O points Number of control signals to be processed via the EtherNet/IP interface. Value
range 16 to 512 output signals (2 to 64 bytes)
Receive data Memory location for receiving the ID code, max. 254 bytes at 2 bytes for I points
Send data Memory location for sending results, max. 254 bytes at 2 bytes for
O points
Receive IL data Memory location for receiving IL data, max. 256 bytes at 0 bytes for I points
These data are processed using the IL function block ControlFieldbus.
Send IL data Memory location for sending of IL data, max. 254 bytes at 2 bytes for O points
These data are processed using the IL function block ControlFieldbus.
Example If 16I was selected as the number of I points and 32O as the number of O points, 16 inputs (= 2 bytes)
and 32 outputs (= 4 bytes) will also be available in the field bus configurator.