Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 397 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 397 /641
System 350 | 3 608 878 300/2019-03
Power redundancy monitoring
status – 0: Low
– 1: OK
– 2: High
The value consists of one ASCII characters.
ID 14
2
Value range 0 – 2
Presetting -
Example:
Power
redundancy
monitoring status Low
Value 0
1
Tapping status of self-tapping
bolts The value consists of one ASCII characters.
ID 15
2
Fixed value 0
1
Placeholder value The value consists of one ASCII character.
ID 16
2
Fixed value 0
1
Placeholder value The value consists of one ASCII character.
ID 17
2
Fixed value 0
1
Tightening error status Error bits indicate errors in the tightening system and are generated from
the following bits in the quality code:
– bit 1 (AngTotH): The total angle is above the defined tolerance
window.
– bit 2 (AngTotL): The total angle is below the defined tolerance
window.
– bit 3 (TorqH): The torque is above the defined tolerance window.
– bit 4 (AnglH): The angle is above the defined tolerance window.
– bit 10 (RedH): The redundancy is above the defined tolerance value.
– bit 14 ((C)Cw=0): CCw or Cw deactivated during the tightening.
– bit 15 (TorqL): The torque is below the defined tolerance window.
– bit 18 (Start-up test): Start-up test NOK
– bit 21 (TimeH): The time is above the defined tolerance window.
– bit 23 (En=0): Enable during tightening deactivated.
The value consists of ten ASCII characters.
ID 18
2
Value range 0000000000 – 9999999999
Presetting -
Example:
Tightening error
status AngTotH
Value 0000000001
10
Torque (T) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 19
2
Value range 000000 – 999999
Presetting -
Example:
Torque (T) 20,11
Value 002011
6
Table 6–105: MID 0065 revision 002
Parameter Comments Bytes