Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 432 / 641

432 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
6.7.7.21 Error numbers
Table 6–125: Error numbers
Error no. Description
01 Invalid data
02 Tightening program not available
03 Tightening program cannot be specified
04 Tightening program not active
06 Activation of ID code upload already available
07 Activation of ID code upload not available
08 Entry source for ID code not permissible
09 Activation for the last tightening result already available
10 Activation for the last tightening result not available
11 Activation of system errors already available
12 Activation of system errors not available
13 Subscription for tightening program selection already available
14 Subscription for tightening program selection is not available
15 Requested tightening ID not found
16 Connection rejected, log overloaded
17 Job number not available
18 Activation for job info already available
19 Activation for job info not available
20 Job cannot be specified
21 Job not active
22 Dynamic job request cannot be carried out
30 Controller is not a sync master
31 Activation for multiple spindle status already available
32 Activation for multiple spindle status not available
33 Activation for multiple spindle results already available
34 Activation for multiple spindle results not available
40 Activation for job line control info already available
41 Activation for job line control info not available
42 Entry source for ID impermissible
43 Activation for work sequence for several IDs already available
44 Activation for work sequence for several IDs not available
45 Subscription of the last job result data (MID 0554) already existed at the time of the repeated
subscription.
46 Subscription of the last job result data (MID 0554) does not exist; thus, cancellation is not possible.
50 Activation for status "Externally monitored entries" already available
51 Activation for status "Externally monitored entries" not available
52 I/O device not connected
53 Incorrect I/O device number
58 No system error available
59 Tool currently in use
60 No histogram available
65 Socket tray not configured
70 Calibration failed
80 Reserved
81 Reserved
82 Activation for automatic/manual mode already available
83 Activation for automatic/manual mode not available
86 Activation for output signal change already available
87 Activation for output signal change not available
88 Activation for operation HVO button already available
89 Activation for operation HVO button not available
90 Activation for socket change already available