Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 380 / 641

380 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Tightening error status Error bits indicate errors in the tightening system and are generated from
the following bits in the quality code:
– bit 1 (AngTotH): The total angle is above the defined tolerance
window.
– bit 2 (AngTotL): The total angle is below the defined tolerance
window.
– bit 3 (TorqH): The torque is above the defined tolerance window.
– bit 4 (AnglH): The angle is above the defined tolerance window.
– bit 10 (RedH): The redundancy is above the defined tolerance value.
– bit 14 ((C)Cw=0): CCw or Cw deactivated during the tightening.
– bit 15 (TorqL): The torque is below the defined tolerance window.
– bit 18 (Start-up test): Start-up test NOK
– bit 21 (TimeH): The time is above the defined tolerance window.
– bit 23 (En=0): Enable during tightening deactivated.
The value consists of ten ASCII characters.
ID 20
2
Value range 0000000000 – 9999999999
Presetting -
Example:
Tightening error
status AngTotH
Value 0000000001
10
Minimum torque limit (T-) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 21
2
Value range 000000 – 999999
Presetting -
Example:
Minimum torque
limit (T-) 12,00
Value 001200
6
Maximum torque limit (T+) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 22
2
Value range 000000 – 999999
Presetting -
Example:
Maximum torque
limit (T+) 20,11
Value 002011
6
Target torque (TP) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID 23
2
Value range 000000 – 999999
Presetting -
Example:
Target torque
(TP) 23,40
Value 002340
6
Table 6–99: MID 0061 revision 002
Parameter Comments Bytes