Bosch Rexroth Tightening System 350, Руководство пользователя

Страница: 362 / 641

362 /641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
MID 0041 revision 002-1, only Rexroth OP
cycles – ErgoSpin: cycles
– Tightening spindle: cycles for the primary transducer
The value consists of ten ASCII characters.
ID 02
2
Value range 0x20 – 0x7F
Presetting -
Example:
cycles 5467
Value 0000005467
10
Date of the last check Date output in the format YYYY-MM-DD:HH:MM:SS.
The value consists of 19 ASCII characters.
ID 03
2
Value range 0 – 9, "-" and ":"
Presetting -
Example (ErgoSpin):
Date of the last check 1/12/2009:2:43:57 PM
Value 1/12/2009:2:43:57 PM
19
Serial number ErgoSpin/tightening spindle: SE/CS serial number
The value consists of ten ASCII characters.
ID 04
2
Value range 0000000000 – 9999999999
Presetting -
Example:
Serial number 476547
Value 476547
10
Data length revision 001
61
Table 6–92: MID 0041 revision 002-1
Parameter Comments Bytes
This revision includes the information from revision 001 and the following additional information:
Calibration value The value consists of four ASCII characters.
ID 05
2
Fixed value 000000
6
Date of the last check Date output in the format YYYY-MM-DD:HH:MM:SS.
The value consists of 19 ASCII characters.
ID 06
2
Value range 0 – 9, "-" and ":"
Presetting -
Example (ErgoSpin):
Date of the last check 1/12/2009:2:43:57 PM
Value 1/12/2009:2:43:57 PM
19
Table 6–91: MID 0041 revision 001
Parameter Comments Bytes