Asentria TeleBoss 830 Скачать руководство пользователя страница 62

Страница: 62 / 157

TeleBoss 830 2.11.370 STD User Manual

Page 62

Username / Password

These two options set the login credentials that are able to access the remote FTP server. The maximum

length Username is 126 characters and maximum length for the Password is 31 characters.

Account

This field is a third login option used only on some FTP servers. Consult your network administrator to see if

this is necessary. The maximum length is 126 characters.

Directory

The Directory is the path used to transfer the file(s). The file(s) is transferred to the root login directory if this

option is left blank. The maximum length is 253 characters.

Minutes Between Push Attempts

This field sets the number of minutes (1 to 9999) between FTP push attempts. The default setting is 1440

minutes.

Permissions

This field is used to set the permissions on the pushed file. Permissions is usable to the extent allowed by the

server. If blank then no permissions change is attempted. The default is blank.

Select Files to Push

This option displays the FTP File Selection menu where you can select which files are pushed by toggling ON

or OFF. The default setting for all is ON, except for Audit Log, which is OFF.

TeleBoss 830 - FTP File Selection
A) Data File 1 [ON]
B) Data File 2 [ON]
C) Events File [ON]
D) Audit Log [OFF]
E) Status File [ON]

Remote File Names

This menu option displays the FTP File Names menu where you can give each file a name, and/or prepend a

date, time, and unique sequence # to the file name.

TeleBoss 830 - FTP File Names
A) Include Date in Filename [OFF]
B) Include Time in Filename [OFF]
C) Include Sequence #s in Filename [OFF]
D) Data File 1 [FILE1]
E) Data File 2 [FILE2]
F) Events File [EVENTS]

Include Date

in Filename

This option toggles through OFF, ON, or YYYYMMDD. When set to ON, the date is formatted with a 2-digit

year (YYMMDD). When set to YYYYMMDD, the date is formatted with a 4-digit year. Either of these options

will cause the date of the file transfer to be appended to the name of each transferred file of data. the default

setting is OFF.

Содержание TeleBoss 830






























































































































































Результаты поиска

Содержание TeleBoss 830

Отзывы:

Бренды по названию

Популярные бренды

Asentria TeleBoss 830, Руководство пользователя

Результаты поиска

Содержание TeleBoss 830

Отзывы:

Бренды по названию

Популярные бренды