Asentria TeleBoss 830, Руководство пользователя

Страница: 16 / 157

TeleBoss 830 2.11.370 STD User Manual
Page 16
from the Event Log Settings and Audit Log Settings menus per the parameters set there. If the unit has
additional serial ports via an expansion card, a FILE location will be available for each port.
The number of records stored in each these four files can be displayed using the DIR command on any
connection to the command interface. To view the data in a FILE, type:
ACCESS[file number] and enter.
PRT and enter, to set a partition at this point in the data file.
RL and enter.
RL releases all data in the partition; RL plus a number would release just that number of records; RL@ a
number release all records beginning at the specified record number; RLn@nnn release n number of records
beginning at record number nnn .
To delete the records that have been so released type CLEAR . CLEAR deletes all the records released via
one of the RL commands. Records not released are not deleted.
Serial Monitoring (Data Events)
The TeleBoss can be used to monitor incoming data for user-defined strings and then report the event via
several avenues. The T830 allows for up to 200 different data events. Each data event contains independent
actions, counters, and other unique settings. Data events triggered within the T830 can be logged to an Event
Log. This file can be viewed through the Event Log section of the Setup menu, via the TYPE EVENTS
command, or via FTP or the web interface.
Environmental Monitoring
Through the use of external EventSensor modules and/or internal Expansion Cards, a variety of
environmental sensor monitoring and alarming capabilities are available in the TeleBoss. Each individual
sensor can be configured with independent actions, counters and other unique settings. Using optional
sensors the TeleBoss can monitor temperature, humidity, air-flow, water on site, smoke and carbon monoxide,
as well as DC or AC power and battery conditions. Sensor events triggered within the T830 can be logged to
an Event Log. This file can be viewed through the Event Log section on the Setup menu, via the TYPE
EVENTS command, or via FTP or the web interface.
Features and Accessories
Standard Equipment
The base T830 comes with the following standard on-board equipment:

AC power input

32MB logging database for text records

(2) RJ45 DTE serial I/O ports

(1) RJ45 Sensor port for connection of Asentria EventSensors

(2) 10/100Mb Ethernet interfaces with support for six 802.1Q VLAN interfaces on each

(1) MMC memory I/O slot

(0, 2 or 6) Expansion Card slots