TeleBoss 830 2.11.370 STD User Manual
Page 136
status of a read-only, non-volatile setting. They are NOT used to configure settings but instead give you the
current status of read-only key.
Example: To determine the state of Eth1 (whether it is Up or Down), issue: sk net.eth[1].link. The TeleBoss
will reply with the current status of Eth1.
Other commands to obtain a dump of all current Status Key values are:
sk get x status
to start an Xmodem download of the Status Key file
sk get a status
to start an ASCII download of the Status Key file
sk g status
to start an ASCII download of the Status Key file
sk ?
to start an ASCII download of the Status Key file
The table below lists the general Status Keys available on the TeleBoss. Other Status Keys that apply to
specific hardware (wireless modem, GPS) are defined in those sections of this manual.
Status Key syntax
Values
Description
event.mgmt.count
Non-negative
integer
Returns the number of events currently under
management in the unit. It is the combined size
of the RAM and flash queues of events. Upon
generation, events go into the flash queue unless
there is space in the RAM queue. Only when the
events are in the RAM queue can their
respective actions be processed. Events are
moved from the flash queue to the RAM queue
as soon as RAM queue space becomes
available.
event.sensor[x].cc[y].value
,
where x is the EventSensor number and
y is the contact closure number
0 to 3600
Returns 0 for contact closure open, and 1 for
contact closure closed.
event.sensor[x].relay[y].value
, where x is the EventSensor number
and y is the relay number
0 to 3600
Returns 0 (inactive, de-energized) or 1 (active,
energized).
net.eth[x].link
,
where x is 1 or 2
for first or second Ethernet interface
Up, Down
Returns whether the interface is up or down. It's
used to determine if there is anything on the
other end of the Ethernet cable ("Up" if yes).
net.vpn.error
String
Returns any error in VPN setup that was
detected when a VPN connection (either passive
or active) was attempted.
net.vpn[x].status
,
where x is the
VPN number
0, 1, 2
Returns the status of VPN x.
0 VPN is stopped
1 VPN is started but not up
2 VPN is up
sys.crdb.file[x].records
,
where
x is 1 to <number of serial ports>, or 17
for the Event Log or 18 for the Audit Log.
Integer >=0
Returns the number of records in a CRDB file.
Содержание TeleBoss 830
Страница 130: ...TeleBoss 830 2 11 370 STD User Manual Page 130 ...
