WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 64
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
Configuring secondary transmit routes
Overtype the displayed information (you can use
Esc
/
Del
and
Menu
keys as
and
keys and cursor will
skip the „.‟ separator). Press
Ent
to save the entries when finished.
The next screen allows you to enable or disable the IP packet receiver.
Configuring IP receiver
Use the or keys to select either
Enabled
or
Disabled
and Press
Ent
(display will default initially to value
previously stored). If you select
Disabled
then you will not be prompted for any further receiver information.
Configuring IP receiver
You will now select whether the received audio stream will be multicast or unicast. Choosing unicast will allow
the receiving unit to simply listen for audio on the selected IP port. Choosing Multicast will force the receiving
unit to subscribe (using IGMP v2) to a multicast stream from the network using the IP address entered in the
next screen.
Configuring multicast receive address
Next enter the multicast IP address that you intend to receive multicast audio from (only displayed if receiver is
programmed for multicast)
IP Directory Setup
Use
Enter To Select
Receive IP Address
224.0
0
1.001.001
IP Directory Setup
Use
Enter To Select
Rx Multicast/Unicast
Unicast
Multicast
IP Directory Setup
Use
Enter To Select
Packet Receiver
Enable
Disable
IP Directory Setup
Use
Enter To Select
Route 2 192.168.100.001
Route 3 192.168.100.002
Route 4 192.168.100.003
Route 5 192.168.100.004
Route 6 192.168.100.005
