WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 50
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
Selecting ISDN speed dial
Use the
and
keys to select the ISDN speed dial you require and press
Ent
. ISDN speed dials are
programmed in the ISDN Directory entry of the ISDN Configuration menu (see section 5.7.1 Setup ISDN
Directory).
5.5.3. Headphone Volume
The volume of the headphone output can be adjusted using this option. Use the
and to increment or dec-
rement the volume level
– press
Ent
when you have selected the level you require.
5.5.4. Auxiliary Data
Auxiliary data is a user defined data stream that is embedded into the audio stream and then recovered and
presented at the remote codec. The auxiliary data interface is an RS232 formatted 9 way „D‟ type female con-
nector sited on the rear panel of the WorldCast Equinox.
Note
: For G711 and G722 algorith
ms, aux data can be set as „on‟ but aux will not actually pass as it
is not supported for either algorithm. This is implemented in this fashion so that the user does not
have to enable/disable auxiliary data when changing algorithms.
Otherwise if you select this option then this sub menu is presented: -
Unit mode setup for (a) MPEGL3, AAC, Enhanced apt-X
®
(b) MPEGL2
Selecting
Auxiliary Setup
allows you to select whether the auxiliary data is embedded in the audio stream
or sent using a separate IP stream.
Mode setup
Auxiliary Setup
Use
Enter To Select
Off.
Embedded
IP Link
Auxiliary Setup
Use
Enter To Select
Auxiliary Setup Off
Auxiliary Setup
Use
Enter To Select
Auxiliary Setup Off
Compatibility RE66X
Select ISDN Speed Dial
Use
Enter To Select
(0. Extd 16 )
(1. Network )
(2. Studio A )
(3. Free )
(4. Free )
(5. Free )
