WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 144
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
the user then puts whatever they want on the voice line, ie data and it is called Data Over
Voice (DOV).
Send Calling Number:
This option allows you to select whether you want to send the calling party number (i.e. your
number) to the remote unit you are calling.
Setup Line Numbers:
This option will allow you to enter the telephone numbers (directory numbers) of the ISDN
lines that the WorldCast Equinox unit is connected to.
Setup SPIDs:
This option will allow you to enter the SPID (Service Profile ID) values for the ISDN lines that
the WorldCast Equinox unit is connected to. This is used only of you are using a North Ameri-
can network.
Fixed ISDN
:
Fixed line also known as private line. This is a point to point link. This is basically ISDN but
without the D channel.
6.5.20.
Panic Dial
Panic dial can be configures to dial IP or ISDN calls using the opto inputs (SIP panic dial will be added for
release 2.0). There are 8 opto inputs which can be configured to dial the speed dial in the event the opto
is triggered.
When selecting a speed dial for IP, the user must select Master or Slave and this will be indicated as M or
S on the Panic Dial menu once configured. Remember that when using IP, both sides of the link need to
be connected and there must only be 1 codec configured as master. The number beside the M or S indi-
cates the speed dial number.
