WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 102
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
The Log File Viewer Window
The Log File Viewer Window reports all events, including the alarms
The Log File Viewer allows you to select a particular unit in order to examine the file entries.
Double-clicking on any of the displayed log entries invokes the Log Entry Detail Window. This provides both a
short description of the logged event and a full explanation. Clicking on the “Prev” and “Next” button will scroll
through all the available event logs.
The logs area will allow for printing the log table, erasing the logs from the pc and exporting the logs to csv file.
It is also possible to filter the logs according to log type or date. The columns beside the log entries will include
destination IP addresses, phone numbers and slot number if applicable (WorldNet Oslo only).
The left hand side of the table, shows the list of units that either are connected or have been previously con-
nected and the logs associated with these.
The number at the bottom left of the screen shows the number of lines (log entries) currently shown. The de-
fault number is 500 so if there are more log entries that need to be displayed, increase this number (up to
999999) and press the refresh icon.
Note:
The Log file is erased from the unit as soon as it is downloaded
– but it is saved in the local PC
for future use (unless the erase button is pressed).
