WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 19
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
Mode/rate configuration screen
Use the
and
keys to highlight the required rate and mode and press
Ent
. You will then be asked if you
want to save this profile.
This next screen allows you to select an inverse multiplexing mode for the unit.
Note that the NMS will not show Imux modes which are not applicable to the algorithm you have selected.
Choosing an inverse multiplexing mode
Use the
or keys to select the mode you require and press
Ent
to select. Clear/None is only applicable for
64k.
Mucas Imuxing is used for (e)aptx.
Clear/None is used for 64k Calls (MPEG and G7xx) where no inverse multiplexing is required.
CCS Imux is used for MPEG Layer 2 128k
H221 can be used from 64k to 256k on MPEG 2, 3 and 4 modes.
CDQ / H221 can be used up to 256k when interfacing with a Tokyo/Mayah product
Layer 3 Bonding will operate from 64k to 128k in MPEG L3 to another Equinox and most other Layer 3 sup-
ported units*
*See Interoperability matrix (separate document) for compatibility tests.
Use the or keys to select the mode you require and press
Ent
to select.
Finally you will be asked if you want to save this profile.
Audio Profile Setup
Use
Enter To Select
Save Profile
No.
Yes
Imux Mode Setup
Use
Enter To Select
MUCAS
Clear/None
H221
CDQ/H221
Layer 3
CCS
MPEG1 L2 Sample Setup
Use
Enter To Select
32 kHz Fs
44.1kHz Fs
48kHz Fs
