3D Systems, Inc.
77
p/n: 15-D100, rev. D
c. Now slide the module on the cart and start turning the
wheel counter-clockwise until the module is fixed on
the cart.
d. Roll the module cart to the side.
10. Vacuum the process chamber with a wet-separator vacuum
cleaner.
11. Clean the complete inside of the process chamber using
paper towels with isopropyl alcohol.
12. In DMP Deposition, click
Material
>
Unload material
to open
the
Unload material from printer
pop-up window. Check
all boxes that have been completed and click
Confirm
empty
. The systems is now empty and ready to receive new
powder/batch/material.
Caution: This action needs to be performed before
a new batch or new material can be loaded
Содержание DMP Flex 350
Страница 1: ...DMP Flex 350 Production printer User guide Original instructions ...
Страница 11: ...3D Systems Inc 6 p n 15 D100 rev D 1 x on the printer door 1 x on the scanner 2 1 4 Laser Safety Label ...
Страница 119: ...3D Systems Inc 114 p n 15 D100 rev D 8 BASIC REGULATIONS 8 1 EC Declaration of Conformity DoC ...