3D Systems DMP Flex 350, Руководство пользователя

Страница: 86 / 120

3D Systems, Inc. 81 p/n: 15-D100, rev. D
6 USER MAINTENANCE
6.1 Preventive Maintenance
6.1.1 Overview Table
FREQUENCY TASK
6.2 Before every print job
6.2.1 Clean Machine Interior and Printer Module
6.2.2 Clean Laser Window
6.3 Monthly
6.3.1 Check Pressure Levels
6.3.2 Check Emergency Off Buttons
6.3.3 Check Chiller Temperature and Water Level
6.3.4 Clean Chiller Air vent
6.3.5 Check Printer Gloves (Option)
6.3.6 Perform Automatic Laser Power Calibration
6.4 Every 3 months
6.4.1 Replace Chiller Fluid and Check Water Quality
6.4.2 Clean Machine Exterior
6.4.3 Check Blower Oil Level
6.4.4 Check Vacuum Pump Oil Level
6.5 Every 1600 job hours
6.5.1 Replace Process Filter
6.6 Every 6 months /
2000 job hours
6.5.2 Clean Overpressure Valve
6.5.3 Clean Vacuum Pump Ventilator
WARNING: WHEN PERFORMING THE OPERATIONS DESCRIBED BELOW, FOLLOW ALL SAFETY PRECAUTIONS AS
SPECIFIED IN THE DMP FLEX 350 USER GUIDE (P/N: 15-D100) AND THE DMP SAFETY GUIDE (80-D0712).