3D Systems DMP Flex 350, Руководство пользователя

Страница: 57 / 120

3D Systems, Inc. 52 p/n: 15-D100, rev. D
B. Run Job
This tab opens after the machine has gone through the preparation cycle. This window shows the current
status of print job (what action is being performed and what is the current layer). It allows you to change
some parameters.
This screen must be active if you want to start a job. If DMP deposition is closed for some reason after the
preparation cycle, the program will automatically ask whether you have inerted the machine. If you inerted
the machine correctly, press yes. To start a job now, open the run job screen manually.
• Feed distance: how much the feed platforms will go up each time to provide the coater with enough powder (in
percent of layer thickness). Making this number higher will reduce short feed occurrences but will use up more
powder.
• Deposition speed: how fast the coater will move while depositing new powder on the build bed.
CAUTION: Changing this parameter can change part properties (mechanical properties, surface roughness, etc.)
• Deposition from the right only: used if you have a limited supply of powder and only want to fill one of the two feeds.
Only powder from the right feed will be deposited on the building platform this will increase the overall deposition
time of the job.
• Keep coater at home positions: with this option set the coater will go to its end position and wait there after each
powder deposition. When this option is not set, the coater will go the end position after deposition and then go back
to between the building platform and the feed to wait for the next deposition cycle.