3D Systems, Inc.
84
p/n: 15-D100, rev. D
c. Now slide the module on the cart and start turning the
wheel counter-clockwise until the module is fixed on
the cart.
d. Roll the cart to the side.
7. Vacuum the process chamber using a wet-separator
vacuum cleaner.
8. Additionally, clean the complete inside of the process
chamber using paper towels with isopropyl alcohol to
remove any remaining residue.
Caution: Pay special attention to the door viewing
window and the laser window as these are critical
components during the printing process. For more
detailed instructions on how to inspect and clean
the laser window, see § 6.2.2.
Содержание DMP Flex 350
Страница 1: ...DMP Flex 350 Production printer User guide Original instructions ...
Страница 11: ...3D Systems Inc 6 p n 15 D100 rev D 1 x on the printer door 1 x on the scanner 2 1 4 Laser Safety Label ...
Страница 119: ...3D Systems Inc 114 p n 15 D100 rev D 8 BASIC REGULATIONS 8 1 EC Declaration of Conformity DoC ...