3D Systems DMP Flex 350, Руководство пользователя

Страница: 2 / 120

3D Systems, Inc. p/n 15-D100, rev D i
TABLE OF CONTENTS
1 INTRODUCTION 1
1.1 Limitations of Warranty and Liability 1
1.2 Intended Use 1
1.2.1 Inert Gas Requirement 1
1.2.2 Oxygen Limits 2
1.3 Copyright 2
1.4 Related Documentation 2
1.5 Safety Precautions 2
1.6 Definitions and Names 3
2 SAFETY GUIDELINES 4
2.1 Safety Labels 4
2.2 Foreseeable Misuse 12
2.3 Residual Risks 13
2.3.1 Personal Protective Equipment (PPE) 13
2.3.2 Fumes 13
2.3.3 Electrical Hazards 13
2.3.4 Mechanical Hazards 13
2.3.5 Contact Hazards 13
2.3.6 Radiation Hazards 14
2.3.7 Thermal Hazards 14
2.3.8 Material Substance Hazards 14
2.3.9 Sharp Edges on the Printed Part 14
2.3.10 Weak Mechanical Integrity on the Printed Parts 14
2.4 Special Considerations - Reactive Metals 15
2.4.1 Electrical Equipment 15
2.4.2 Fire Suppression 15
2.4.3 Good Housekeeping 15
2.5 Lock-out/Tag-out 16
2.5.1 Policy 16
2.5.2 Principles, Beliefs and Philosophy 16
2.5.3 Rules 16
2.5.4 Electrical Lockout-tagout Procedure 16
2.5.5 Remove Energy Stored in Argon and Compressed Air Lines 17
2.5.6 Restore Equipment to Service 17
2.5.7 Procedure Involving More than One Person 17
2.6 Safety Interlocks 18
2.6.1 Stack Light 18
2.6.2 Shut-off Matrix 20